iDAQ-731-AE16-ch Isolated DI, 16-ch Isolated DO iDAQ Module
- Device model: DF-RP-1053
- Brand: Advantech
Viewed 1063 times
iDAQ-731-AE16-ch Isolated DI, 16-ch Isolated DO module for iDAQ modular cassis iDAQ-934/iDAQ-938 or iDAQ-964.
Advantech iDAQ Series DAQ Modules splits traditional functions in PCI/PCIe cards and USB modules into several smaller functional units. The iDAQ series includes modules and chassis such as the iDAQ-900. These DAQ modules are hot-swappable, which results in easy maintenance. The anti-vibration, EMC immunity, and wide-range temperature operations make the iDAQ system rugged. These DAQ modules use an aluminium alloy as their enclosure that provides better EMC performance. The iDAQ series features either digital input, analogue input, or IEPE input functions. These DAQ modules operate at -20°C to 60°C operating temperature range. The iDAQ series is used for electric vehicles, 5G communications, and EV battery test systems setup creation.
Features
- Hot-swappable in iDAQ system
- Euro-type spring terminal blocks
- 32-ch isolated DI/O (16-ch digital input, 16-ch digital output)
- High output driving capacity
- Interrupt handling capability
- Digital output type changeable between sink (NPN) type and source (NPN) type
- Isolation protection of 600 VRMS
- Support buffered acquisition/update rate up to 10kHz
Product Specification
Download IDAQ-731-AE Specification in PDF [ENG]
|
Isolated Digital Input |
|
|
Channels |
16 |
|
Input type |
Sink (NPN) |
|
Input logic level (referenced to DICOM) |
|
|
Input current draw |
|
|
Input protection voltage |
+60 V max, -8 V min. |
|
Response time |
100 μs max. |
|
Debounce filter |
10 μs ~ 84 ms, software configurable |
|
Isolation protection |
600 VRMS |
|
Acquisition type |
Instant or buffered, software configurable |
|
Buffered acquisition |
|
| Edge detection | Rising edge, falling edge, or both edges, software configurable for each channel independently |
| Pattern match detection | By port detection, each channel can be enabled or disabled by software independently |
| Frequency | 1 kHz max |
| Other feature | Latch digital input states when interrupt occurs |
| Timing signal output to chassis | From one of the digital input channels or digital input pattern match event, software configurable |
Universal Isolated Digital Output |
|
| Channels | 16 |
| Output type | Sink (NPN) or source (PNP), software configurable per port (8-channel) |
| Load voltage | +10 V ~ +40 V |
| Load current | 350 mA max. per channel |
| Output impedance | 0.2 Ω max |
| Response time | 100 μs max |
| Isolation protection | 600 VRMS |
| Current limit protection | Yes |
| Flyback diode protection | Yes |
| Power-on output state | OFF state |
| Acquisition type | Static or buffered, software configurable |
| Buffered output |
|
General |
|
| Power consumption from chassis | 425 mW typ./ 450 mW max |
| Dimensions | 100 x 80 x 25 mm (3.94 x 3.15 x 0.98 in.) |
| Operating temperature | -20 °C to 60 °C (-4 °F to 140 °F) |
| Storage temperature | -40 °C to 70 °C (-40 °F to 158 °F) |
| Operating humidity | 10% to 90% RH, non-condensing |
| Storage humidity | 5% to 95% RH, non-condensing |
| Vibration | 5Grms |
| Shock | 30G |
| Certification | EMC: CE, FCC Safety: CB, UL |
